FSBB30CH60C – onsemi Motion SPM 3 Intelligent Power Module, 600V 30A 3-Phase IGBT, SPM27-CC

What is the FSBB30CH60C? The FSBB30CH60C is an intelligent power module (IPM) from onsemi's Motion SPM® 3 series that combines a 600 V, 30 A three-phase IGBT inverter bridge with its gate-drive and protection ICs in a single 27-pin SPM27-CC (PowerDIP) package. It is designed to drive AC induction, BLDC and PMSM motors in low-power inverter applications such as air conditioners, washing machines, fans and pumps.

Because the high-voltage gate driver (HVIC) is built in, the module runs from a single 15 V supply and needs no optocouplers or isolated supplies, which removes a large part of the external drive circuitry and shrinks the inverter board. Built-in bootstrap diodes further simplify PCB layout, while the DBC (direct bonded copper) substrate keeps thermal resistance low for reliable operation at full load.

Key Features

• 600 V / 30 A three-phase IGBT inverter bridge with integrated control ICs for gate driving and protection
• Built-in high-speed HVIC – single-grounded supply, opto-coupler-less, direct MCU interface
• Integrated bootstrap diodes for simplified PCB layout
• Under-voltage lockout (UVLO), over-current shutdown and fault (VFO) reporting
• Divided negative DC-link terminals for individual phase-current sensing (single- and three-shunt control)
• Low-loss, short-circuit rated IGBTs with optimized gate drive for reduced EMI and switching loss
• Isolation rating 2500 Vrms/min; UL certified (No. E209204)
• Low thermal resistance DBC substrate; through-hole 27-lead PowerDIP module

Technical Specifications

Parameter	Value
Manufacturer	onsemi (formerly Fairchild Semiconductor)
Series	Motion SPM® 3
Type	Intelligent Power Module (IPM) / Smart Power Module
Configuration	3-phase IGBT inverter bridge (6 switches)
Collector-emitter voltage (VCES)	600 V
Rated collector current (IC)	30 A
Control supply voltage	13.5 V – 16.5 V (15 V typ.)
Isolation voltage	2500 Vrms / 1 min
Max. power dissipation	106 W
Max. junction temperature	150 °C
Operating case temperature	−40 °C to +125 °C
Package / case	SPM27-CC / SPM27-EC, 27-lead PowerDIP module
Mounting	Through hole
Protection	UVLO, over-current / short-circuit shutdown, fault output
RoHS	Compliant, lead-free

Typical Applications

• AC 100 V – 253 V three-phase inverter drives for small AC motors
• Air conditioner and heat-pump compressor and fan drives
• Washing machine, dishwasher and refrigerator inverter boards
• Circulation pumps, industrial fans and blowers
• General-purpose BLDC / PMSM / AC induction motor drives up to ~1.5 kW
• Inverter PCB repair and replacement for white goods and HVAC service

Frequently Asked Questions

What voltage and current does the FSBB30CH60C handle?

It is rated at 600 V and 30 A, intended for three-phase inverter drives operating from 100 V to 253 V AC mains.

Does the FSBB30CH60C need optocouplers?

No. The built-in HVIC accepts logic-level inputs directly from an MCU on a single-grounded 15 V supply, so no optocoupler or isolated gate-drive supply is required.

Which package does the FSBB30CH60C use?

A 27-lead SPM27-CC (also referenced as SPM27-EC) through-hole PowerDIP module with a DBC baseplate for low thermal resistance.

What protections are built in?

Under-voltage lockout on both control and bootstrap supplies, over-current / short-circuit shutdown via an external shunt, and an open-collector fault output (VFO) whose pulse width is set by an external capacitor.

What are the equivalent or alternative parts?

Within the same family: FSBB20CH60C (600 V / 20 A), FSBB15CH60C (600 V / 15 A), FSBB30CH60CT (30 A with built-in NTC thermistor) and FSBB30CH60F (full-pack variant). The FSBB30CH60C is classified as not recommended for new designs, so it is mainly sourced for production continuity and service/repair.

Is the FSBB30CH60C RoHS compliant?

Yes, it is lead-free and RoHS compliant.